Happymodel Moblite7 V3.0 Walksnail 1S 75mm HD Whoop FPV Racing Drone with Walksnail Avatar Nano HD Digital System

$462.00

Description

Size: Tiny Whoop
Brand: Happymodel
Version: BNF
Voltage: 1S
Camera Resolution: HD

Precise details:

V2.0 update log:

1. Changed to GNB27 connector and V4 frame, no need 3d print battery tray anymore.  

2. Changed the propeller to Gemfan 1635-3 propellers.


V3.0 Update log:

1. ELRS RX Version, Flight Controller AIO ESC board change into SuperX HD ELRS Flight Controller 

2. Frsky Receiver Versions still v2 version.

3. Changed to A30 connector


Notes:

1. Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible.

2. NOT Included Lipo battery!


Specification:

Brand: Happymodel

Model: Moblite7 Walksnail V3

Item Name: 1S 75mm HD Whoop FPV Racing Drone

Frame wheelbase: 75mm
Weight: 34.5 gram without battery
Size: 98mm*98mm*48mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30

Onboard blackbox ready




New V3.0 Version Old Version
Flight Controller

SuperX HD ELRS Flight Controller

Betaflight 4.4.2 firmware readyFirmware target: CRAZYBEEF4DXMCU:STM32F411CEU6 100MHz, 512K FLASHSensor: BMI270 or ICM42688P SPI connectionPower supply: 1-2S Lipo Lihv battery input DC 2.8V~8.7V, only support 1s input for this droneBuilt-in 12Aeach Blheli_S 4in1 ESC Dshot300 readBuilt-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware updateBluejay ESC Firmware readyBuilt-in 5V 1A BECBuilt-in voltage detectionNo betaflight analog osd chip

SuperbeeF4 Lite ELRS/FRSKY

SPI ELRS version Firmware target: CrazybeeF4SX1280
SPI FRSKY version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 100MHz, 512K FLASH
Sensor: MPU-6000 or ICM20689 or BMI270SPI connection
Power supply: 1S Lipo Lihv battery input DC 2.8V~4.35V
Built-in 5Aeach Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSDSPI Control
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A 3 secondsSupport ESC-Configurator and BLHELI_S Suite configuratorFactory firmware: Z-H-30 – Bluejay, 0.19, 48kHzDefault protocol: DSHOT300

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV 2.8v~4.35v

Currents: 5A continuous peak 6A 5 seconds
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600

Onboard Receiver

ELRS Receiver Version:

Onboard UART ExpressLRS 2.4GHz Receiver

RF Frequency: 2.4GHzAntenna: enameled copper wire 31mm lengthTelemetry output Power: <12dBmReceiver protocol: CRSFDefault firmware version: ExpressLRS V3.0.1The same hardware with Happymodel EP1 receiverCould update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through


Frsky Receiver: Doesn’t have V3 Version. 

ELRS Receiver Version:

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Telemetry output Power: <12dBm
Receiver protocol:  SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module


Frsky Receiver Version:

SPI BUS receiver Frsky D8/D16 compatible
Compatible Non EU transmitter D8 model and EU-LBTFrsky_x_lbt
Channels: 8ch or 16ch
Failsafe support
No ground interference 

 Transmitter and receiver 1 m from the ground: 100m~200m
Based on CC2500 RF module Compatible with Futaba S-FHSS , Redpine protocol




Motor Model: 1002 20000KVConfigu-ration:9N12PStator Diameter:10mmStator Length:2mmShaft Diameter:Φ1.5mmMotor DimensionDia.*Len:Φ13.5mm*12.5mmWeightg:2.5gNo.of CellsLipo:1S only
Propeller Gemfan 1610-2 Bi-blades V1
Weight:0.24gMaterial: PCPitch:1 inchProps Dia:40mmCenter Hole Dia:1.5mm
VTX

Model: Avatar mini 1s moduleCommunication Frequency: 5.725-5.850 GHzTransmitter PowerEIRP: FCC:<25.5dBm; CE:<14dBm; SRRC: <20dBm;MIC:<25dBml/o Interface: JST1.O*6Power inJST1.O*4USBMounting Holes: 25.5*25.5 mmDimensions: 33*33*6.5 mmStorage: 8GRecording: 1080p/720pWeight: 6.8 gOperating Temperature: -20-40℃Channels: 8Wide Power lnput: 3.1V-5VSupported FC System: BetaflightOSD: Canvas modeBitrate: 25mbps / 50mbpsLatency: Average delay 22msAntenna connector: IPEX

FPV Camera Model: Avatar nanolmage Sensor: 1/2.7”InchResolution: 1080P/6Ofps,720P/120fps,72OP/6OfpsRatio: 16/9 4/3Lens: 2.1mmFOV 170°Aperture: F2.0Shutter: Rolling shutterMin.Illumination: 0.001LuxWeight: 3.5gDimensions: 14*14*17mmCoaxial Cable: 45mm


Package Included:

1x Moblite7 V3 Walksnail FPV Drone

1x Spare Canopy

1x Propeller disassemble tool

1x Screw driver



Additional information

Receiver

ELRS 2.4GHz

Reviews

There are no reviews yet.

Be the first to review “Happymodel Moblite7 V3.0 Walksnail 1S 75mm HD Whoop FPV Racing Drone with Walksnail Avatar Nano HD Digital System”

Your email address will not be published. Required fields are marked *